●Catering Industry●
Pedal Control Faucet Retrofit Kit A-100
With such high water consumption in catering industry, the long-term water costs can be very considerable. When catering staff works at the kitchen counter, they often expend too much time at the faucet because they are holding a lot of things with their hands, their hands are contaminated, or the handle is too far away. They might worry about dirtying the faucet with difficult-to-clean food smells or stains, which will make subsequent cleaning difficult.
The A-100 has two water outlet modes, a single step on the water outlet and continuous step on the water outlet (both will stop after 60 seconds or release). It can be installed at the most frequently used faucet, and totally operated through the foot pedal. Since hands are not a limiting factor, the water source can be turned off immediately when not in use, saving a lot of water resources. In addition, there is no need to worry about spreading bacteria or viruses that can be caused by frequent hand contact when just using foot pedal operation, and there is no need to touch the faucet again after hand washing, which is much more hygienic!
The A-100 is suitable for almost any faucet, and there is no need to replace the original sink. Only a few parts need be installed at the water source to complete transformation of the existing device!
The retrofit kit is battery-operated, and is therefore not limited by any power considerations.
|
|