Products Sanitary Bathroom Heating Fan General Bathroom Heating Fan J-330

General Bathroom Heating Fan J-330

- +

COMPARE INQUIRY

JLA general bathroom heating fans can be installed nearly anywhere in the bathroom. This device has two motors to ventilate the air and heat up the bathroom. It is waterproof and fireproof, with a wired control panel and remote controller, and five functions. Five different LED light colors represent different functions.

7 Features！

Ventilator

There are two modes in ventilation function, power and standard mode. Power mode is suitable for a large bathroom or rapid ventilation needs; standard mode is low noise and suitable for taking a bath.
The ventilation function can control the mist in the bathroom, at the same time, it dehumidifies and effectively deodorizes the room.

Heater

There are two heating modes, preheat and bathing mode. The former can be operated 15 minutes before taking a bath or shower; the latter operates with lower air volume. Using the heating function in the winter effectively manages water vapor when taking a shower.
Our device can heat up a bathroom quicker and safer than a traditional heater can, a meaningful improvement for the elderly parents, children, and people with high blood pressure.

Fan

There are two modes in the fan function, standard mode, and low-noise mode. It is suitable for high humidity weather or high temperatures.
Use the fan function in Summer to increase air circulation, or to dry clothes is energy-saving.

Dryer

The dryer function can create a comfortable bathroom by removing the moisture and circulating warm air to dry clothes, which is practical on rainy or winter days.
It takes only 3-4 hours to dry a bathroom, and will automatically lower the air volume after operating for more than half of the preset time.

Light

Combines the external light function with the original light in the bathroom to control them in just one touch.

Preset

The preset function is convenient for drying clothes when going out or at night.
In addition, it can warm up the bathroom in the morning.

Timer

With the timer function, an operating time can be set to prevent forgetting to turn the machine on or off.
7 Sections Timer Settings (0.5H, 1H, 2H, 3H, 4H, 5H, 8H), LCD indicates the Setting Time and Remaining Time.

J-300~J-351 General Bathroom Heating Fan

Uses PTC (Ceramic Heating Plate) heating device with 7 layers of safety protection and heat resistant vent to prevent overheating. Adopts an independent temperature fuse for the motor, and a NTC temperature sensor with automatic power-off function to ensure safety when using the equipment.
With the separated air outlet design, the system is easily installed.

Model	General Bathroom Heating Fan
Installation Dimension	415×295×200mm
Cover Dimension	488×368mm
Voltage	110V		220V
Frequency	60Hz		60Hz
Project		Current A	Current A
Ventilator	Standard	0.13	0.07
Ventilator	Powerful	0.15	0.09
Fan	Low Noise	0.25	0.16
Fan	Standard	0.26	0.17
Heat	Bathing	9.62	4.96
Heat	Before Bathing	10.7	5.34
Dryer	Powerful	10.79	5.42
Connection Diameter	4”
Weight	7.1KG

Wired control panel

JLA is the first in the industry to combine an LCD panel with LED backlight module.
Can be connected with an external lighting switch for ease of use.
The 7 section timer is extremely user-friendly.